The folding ladder is delivered in storage position. Place the ladder on the ground with the stabilisers facing downward. Slightly open the centre of the ladder so that you can remove the platforms. Return the ladder to storage position. Grasp the part of the folding ladder with the Red Step® and pull it up 90°. Repeat this on the other side of the ladder. Now, pull the centre part of the ladder up until it is straight and locks into place. Place the platforms back on the ladder.
Wall spacer position
The ladder can quickly be switched from a platform position to a wall spacer position. Remove the platforms from the folding ladder. Grasp the part of the ladder without the Red Step®, unlock it and unfold it until it is straight and locks into place. Note that the Red Step® is at the top of the ladder. Now you can place the ladder in the wall spacer position.
After the wall spacer position, it is time for the ladder position. Grasp the part of the ladder that is standing against the wall, unlock the hinge and unfold the part until it is straight, creating a single straight ladder. In this position it is also important that the Red Step® is at the top of the folding ladder.
Place the ladder on the ground. Unlock the centre hinges, fold the centre part of the ladder upwards until it locks into place and stands in A-position.
Grasp the part of the ladder that's the farthest to the right or to the left. Unlock the hinge and fold the end part all the way up. Repeat this on the other side of the ladder. Turn the ladder upside down so that the stabilisers are standing on the ground. Return the platforms to the centre of the ladder and close the ladder until you hear a click and the ladder is back in folding position.